COLO-Your Source For Powder Coating System
Surface Finishing Technology
since 2009Call us Today!
+86-133-96517035
Home / All / Powder Coating Machine / Hopper Powder coating Set /
Manual Powder Coating Gun System COLO-660
Manual Powder Coating Gun System COLO-660
Detail Information
Manual Powder Coating Gun System COLO-660
COLO-660 manual powder coating gun system comes with user-friendly one-touch operation buttons, which is convenient to change the shape for coating, and create perfect finish for an kinds of parts. The reliable quality ensures minimum operation cost or maintenance costs, it is an extremely practical model proved by worldwide users for many years.
Product Details
COLO-660 Powder Gun Controller
COLO-660 powder coating gun with innovative design has four pre-programmed control options for spraying different parts. These one-touch intelligent operation buttons give you an quick access to powder coating.
1) Flat mode: Maximize voltage for super transfer efficiency for coating flat parts.
2) Recoat mode: Adjusts the voltage and current automatically for repeat coating.
3) Complex mode: Adjusts the voltage while holding current with coating complicated shapes.
4) Pulse mode: Rapidly and continuously recharges the powder to coat complex shapes and deep corners.
COLO-08 Electrostatic Spray Gun
* Long-lasting 100kv spray gun maximizes the electrostatic charging capacity, provides high transfer efficiency and saves materials.
* Lightweight spray gun with ergonomic design tends to reduce operator's fatigue after long time use.
* Comes with full array of nozzle assortment to optimize your spraying effect, including flat nozzle, round spray nozzles with different size deflectors, and extension nozzles.
Fluidizing Powder Hopper
* Size: D36xH52cm, Capacity: 50 pounds powders.
* The easy cleaning powder coating hopper is popular among worldwide powder coaters, It is extraordinary designed to be dismountable, convenient to clean the inwall, bottom, fluidizing board, seal ring of the hopper.
* The powder hopper with fluidizing bed prevents the powder block, which is also well sealed keep the powders from contaminants and damp.
Product Parameters
|
Model
|
COLO-660
|
|
Power Range |
220V/110V |
|
Frequency
|
50HZ/60HZ |
Gun Weight | 500g |
|
Temperature range in use |
-10 ℃+50 ℃ |
Rated output voltage | 24VDC |
Input Voltage | 0-100KV |
Output current | 0~150uA(max) |
Maximum powder injection | 600g/min |
Polarity | negative (-) |
Customer Feedback
Review
- Loading...
In need of our Powder Coating Kits?
Find out more about our standard Size powder coating equipment Kits (Includes Powder Coating Booth, Electric or Gas Powder Oven, and Optional Gun) or send us your enquiry now to find out what we can do for you.